Once a day, standby for three years, alarm mode, adjustable real-time positioning……
Ⅰ、Product Overview
This wired GPS locator combines GPS, Beidou, and LBS positioning technologies to provide you with accurate and stable positioning services. Widely applicable to various application scenarios, such as vehicle tracking, asset monitoring, etc.
Ⅱ、Core functions
1. Real time tracking:
- Real time uploading of positioning data ensures that you can always grasp the target location.
- Whether in urban streets or remote areas, accurate positioning information can be provided.
2. Historical trajectory:
- Record and store past movement trajectories to help you trace and analyze the activity of your target.
- The convenient trajectory playback function allows you to easily understand the target's motion path.
3. Electronic fence:
- Allow you to set a specific area, and once the target leaves or enters that area, you will immediately receive an alarm message.
- The powerful geofencing function provides security for your goals.
4. Vibration alarm:
- When the device senses abnormal vibration, it will immediately send an alarm message to your phone or designated receiver.
- Helps prevent theft or illegal movement, ensuring asset security.
5. Telephone alarm:
- When the alarm condition is triggered, the device can automatically dial the preset phone number to give an alarm.
- Real time voice notifications allow you to stay informed of emergency situations as soon as possible.
6. SMS alarm:
- The device supports sending alarm messages through SMS, ensuring that you can receive timely notifications even in a network free environment.
- The SMS content includes key information such as alarm type, time, location, etc., making it convenient for you to quickly judge and handle.
Ⅲ、Applicable scenarios
- Vehicle tracking: Real time monitoring of vehicle location to prevent theft or illegal use of vehicles.
- Asset monitoring: Real time monitoring of valuable items to ensure asset safety.
Ⅳ、Product advantages
- Combining multiple positioning technologies to provide accurate and reliable positioning services.
- Wide voltage support and strong adaptability.
- Multiple alarm functions ensure safety and worry free operation.
- Easy to use and easy to install.
Ⅴ、Precautions
- Please ensure that the equipment is installed in a waterproof, dustproof, and high-temperature environment.
- Please regularly check the power and signal status of the equipment to ensure its normal operation.
- For further assistance or technical support, please contact our customer service team.
| Function Name | Function Description |
| power supply | 干Backup battery |
| Work Voltage | DC 3.4V - 4.5V |
| Work Current | 4V/Average 30mA |
| Sleep Current | 4V/Lower than 10mA |
| Battery Capacity | 4200mAh (Dry battery) |
| Work Temp | -20℃ - 75℃ |
| Storage Temp | -30℃ - 80℃ |
| Work Humidity | 10%-85% RH Non condensing |
| Module Brand/Chip Model | N58 EA/LA |
| Frequency | Multiple 4G versions |
| SIM card | Nano SIM card |
| Antenna | Built in antenna |
| Antenna spec | FPC antenna |
| Module Brand/Chip Model | ZKW AT6558R |
| Location mode | Beidou+GPS |
| Cold Start | Average 32S |
| Hot Start | Average 1S |
| Sensitivity (tracking) | -162 dBm |
| Antenna | Built in antenna |
| Antenna spec | 25mm * 25mm * 4mm |
| GPS Frequency | L1: 1575.42±1.023MHz |
| BD Frequency | B1: 1561.098±2.046MHz |
| Satellite channel | 50 |
| Location accuracy | <10m（1σ） |
| Timing accuracy | <30ns（1σ） |
| Speed measurement accuracy | <0.1m/s（1σ） |
| Max acceleration | 4g |
| Max speed | 515m/s |
| Max height | 18000m |
| Light perception | support |
| Host size | 85mm * 50mm * 33mm |
| Housing Material | ABS |
| IP grade | |
| Strong magnetism | support |
| Host weight | 150g |
Instructions for use
Please carefully read the installation and usage guide before use to obtain the correct installation method and quick operation. If there are any changes to the appearance and color of the product, please refer to the actual product! If there are any updates to the software content, the instructions provided with the latest version of the software shall prevail. Our company does not assume legal responsibility for any negligence or oversight during use.
1.1 Product accessories
Standard configuration: equipment/power cord/quick installation guide
2.1 Status of device lights
Red LED (power/working status)
| Lamp status | meaning |
| Chang Liang | Normal operation |
| Not lit | Shutdown |
Blue LED (GPS signal status)
| Lamp status | meaning |
| Flash fast once within 2 seconds | GPS signal search in progress |
| Chang Liang | GPS located |
| Not lit | GPS sleep/shutdown |
Green LED (GSM signal status)
| Lamp status | meaning |
| Flash fast once within 2 seconds | GSM initialization |
| Chang Liang | GPRS is normal |
| Not lit | GSM sleep/shutdown |
3.1 Preparation work before installation
1. Open the packaging box and check if the equipment model is correct and if the accessories are complete. Otherwise, please contact your dealer;
2. SIM card selection, the terminal needs to insert a standard SIM card, select the supported operator's SIM card.
3. Installation of SIM card: Based on the type of SIM card slot on the device, confirm the direction of the SIM card and place it correctly.
Attention:
⑴ Before installing or removing the SIM card, please cut off the power supply to the terminal;
⑵ The terminal SIM card needs to have internet connectivity enabled;
⑶ The pickup function needs to enable the caller ID display function (choose whether to enable or not according to the customer's needs);
⑷ If your SIM card has been enabled and requires the input of a SIM PIN, please refer to your phone's user manual to turn off the input of a SIM PIN function;
⑸ Please ensure that the terminal SIM card has a fee.
3.2 Installation
The recommended installation method for the terminal is concealed installation, and it is recommended that the terminal installation be carried out by a professional organization.
Please note the following:
1. Concealed installation, pay attention to waterproofing;
2. Avoid placing it together with the transmission source, such as reversing radar, anti-theft devices, and other onboard communication devices;
3. The device is equipped with GSM and GPRS antennas, and during installation, it should be ensured that the GPS receiver is facing upwards (facing the sky) and there is no battery metal shielding above.
Suggested installation location:
⑴The concealed area inside the decorative frame below the front windshield of the car;
⑵Concealed areas around the front dashboard of the car (with a non-metallic surface);
⑶Under the decorative panel below the rear windshield of a car;
⑷Inside the car door or center pillar;
⑸Concealed areas inside the dashboard or under the rear seat of electric vehicles/motorcycles.
4.0 Steps for Proper Use of Products
Installation → Power on → Settings → Registration
Installation: When installing, the GPS antenna should face the sky, and above the installation position, there must be no electromagnetic wave absorbing substances (such as metal, explosion-proof insulation film) blocking the area.
Power on: Install the SIM card in the correct direction, connect the wires according to the terminal wiring diagram, and then turn on the power switch.
4.1 Troubleshooting
| Usual issues | problems arose | Solution |
| Poor signal reception | Using terminals in areas with poor reception, such as near high-rise buildings or underground parking lots, cannot effectively transmit radio waves | Use the terminal in a location with good signal |
| Platform display not enabled | The main power cord is not connected properly | Find the correct circuit and rewire it |
| SIM card not installed properly | Check the SIM card and install it correctly | |
| SIM card arrears | Please contact the card service provider for renewal | |
| SIM card not activated for GPRS function | Please contact the card service provider to activate GPRS | |
| The IP port is incorrect (can be queried through instructions) | Send SMS command to modify IP port | |
| The platform map display location is incorrect | GPS not located | Please locate in an open outdoor area |
| After the terminal is installed, the vehicle remains stationary | Drive the car onto the road and run a few laps | |
| Check if any lights are on | Insert the card first and then turn it on. If there is no light on, please charge it | |
| Platform Display - Offline Status | SIM card overdue or cancelled GPRS | Please check the SIM card status |
| Offline area - weak signal | Please try again at a place with strong signal |
5.0 Common Instructions
| Instruction mean | Instruction Format |
| Query software version | <XYRVER> |
| query state | <XYRCX> |
| Modify Platform Server | <XYR*U:IP, Port> |
| <XYR*Q:Domain Name: Port> | |
| Set alarm mode | <XYR*R:HHMM,HHMM,HHMM,HHMM>
HH represents hours, MM represents minutes Example:<XYR*R:1620,1730,1800,1830> |
| Set Week Mode | <XYR*W:1,1234567,HHMM>
123456 represents: Monday to Sunday,HH represents hours, MM represents minutes Example:<XYR*W:1,1234567,1640> |
| Set interval mode | <XYR*D:MMM>
Time range:MMM=10~5000 minutes Example:<XYR*D:015> Representative: Interval of 15 minutes |
| Limited time chasing mode | <XYR*D:XXX,YYY>
XXX=1-9 minutes YYY=5~4320 minutes Example:<XYR*D:003,015> Represent, with an interval of 3 minutes, chasing the car for 15 minutes |
| Set timing,Limited time chasing mode | <XYR*D:MMMM,XXX,YYY>
MMMM=0000~2359(24 hours) XXX=1-9 minutes YYY=5~4320 minutes Example:<XYR*D:1525,003,015> Indicates an interval of 3 minutes, with a transmission time starting from 15:25 and tracking for 15 minutes |
| Turn on light sensitivity | <XYR*G:00> |
| Turn off light sensitivity | <XYR*G:01> |
| Modify IMEI | IMEI,Number# |
| Status query | STATUS# |
| ICCID query | ICCID# |
| Offline data transmission | BACKUP# |
| Restore all parameters | DEFAULT,1# |
| FACTORY,1# | |
| Restore wake-up times to 1510 | WKTRST |
| Remaining Work Count Query | WKTRST,Q |
| Set work frequency | WKTRST,123 |
| Last failed upload flag query | WKTRST,ER# |
| Quickly set the number of GPS positioning times and issue another recovery command. The device will prioritize WIFI positioning in non manual power on mode again | WKTRST,GC# / WKTRST# /WKTRST,Q# |
| Log platform address | server_log |
| AGPSStatus query | AGPS,STATUS# |
| GSM network search detection | VCREG# |
| Restart command | RESET# |
| AGPS service address | EPOSERVER# |
| Query supplementary transmission switch | BKSW# |
| Enable supplementary transmission | BKSW,1# |
| Close supplementary transmission | BKSW,0# |
| Query WIFI status | WIFISW# |
| Turn off WIFI | WIFISW,0# |
| Enable WIFI | WIFISW,1# |
| APN Query | APN# |
6.0 Platform Login
1. Web platform:www.smake168.com
Support multiple languages, you can contact us to add languages
2. App download
- Android version
- Android version - click to download
- Apple version
- iphone version - click to download
3. Account login
1, Multiple devices can be managed through platform accounts
2, Through the account, devices can be managed and sub accounts can be established
3. Individual users can log in directly through their device's IMEI number, with a default password of 123456. Please change your password in a timely manner